Carefree FIESTA User Manual download pdf (Page 4)

MANUAL PATIO AWNING Installation Manual Carefree of Colorado

2 052876-005

INSTALLATION

GENERAL LAYOUT

Awning Rail

Roof Line

Floor Line

Awning Width

(in 12” increments)

Brake Lever (ref)

SF003

Fabric Width

5”

(approx.)

5”

(approx.)

Bottom Mounting

Bracket

Upper Mounting

Bracket

Figure 2. General Layout.

INSTALLING AN AWNING RAIL (IF REQUIRED)

1. Position the awning rail along the roof line (line where roof and wall

meet) or a minimum of 6" above the upper edge of the door or windows

the awning is covering. Awning rail must be level and parallel with the

floor line of the vehicle.

2. After determining mounting position, mark the position with a chalk line.

3. Seal the back of the rail with silicone sealant or putty tape.

4. Align the awning rail onto the wall and secure with #10 x 3/4” screws.

Use all the attachment holes in the rail.

5. Use a screwdriver to spread open the left end of the awning rail on the

installation side.

6. File any sharp edges or burrs from the end of the rail. This will help protect the awning fabric from

damage during installation.

7. Spray inside the awning rail track with silicone lubricant.

Spread open

the end of the

awning rail

T0012a

Figure 3. Installing the

Awning Rail.

Table of Contents

1 2 3 4 5 6 7 8

No comments

Carefree FIESTA User Manual Page 4